Top message

Bird box cameras, wildlife cameras, inspection cameras & more
High quality, great value - CALL SALES +44(0)1209 313579

Main Menu

Account login







Like us on facebook
follow us on twitter

Proud corporate supporters of Cornwall Wildlife Trust


Leading UK company
Trusted by experts in 100+ leading worldwide institutions like BBC, UK Wildlife Trusts, RSPB, WWF, Oxford University, London Zoo, Environmental Agency, World Parrot Trust, + many UK schools, Universities and Authorities.

SPECIAL EDUCATIONAL DISCOUNTS AVAILABLE

Schools, Colleges, Universities, Research institutions - Please click here for more

Trail camera firmware software download PDF Print E-mail
<< Click to like


Trail camera firmware software upgrades

On every trail camera there is internal software that controls the camera. In order to improve the performance, the manufacturers update the firmware from time to time. You can update the firmware by following these steps:

Please read the notes before installing. Make sure that the correct file and model is matched.

Bushnell Natureview Cam HD Max Software - HK100540 - 119439
Bushnell Natureview Cam HD Max (with colour screen) Software - HK100541 - 119440

Bushnell Natureview Cam HD Max Software - HK100540 - 119439

Image17/06/2013 - Update

Before you install

Check model number (sticker on back) says 119439. Check that serial code (sticker inside) is less than B130516900.

Instructions (On a PC - Try similar for MAC)

  1. Make sure camera has new batteries.
  2. Turn camera to 'OFF' position and remove the SD card.
  3. Delete everything on SD card on your computer. The SD card should not be blank.
  4. Download firmware
  5. Unzip it using windows unzipping software. Unzipping software links on our download page. The folder should contain 2 files.
  6. Copy the two files to your SD card.
  7. Eject the SD and plug into your camera.
  8. Press and hold down the UP button while moving the switch from the 'OFF' position to 'SET UP'. Continue to hold the UP button for at least the first 10 seconds. The camera setup LED on the front of the camera will flash red and green. The Upgrade starts and finishes in about 30 seconds, once it has finished the green LED light will stop blinking and turn to simply a red LED motion sensor light.
  9. Your camera should be now ready to go.

Bushnell Natureview Cam HD Max (with colour screen) Software - HK100541 - 119440

Image17/06/2013 - Update

Before you install

Check model number (sticker on back) says 119440. Check that serial code (sticker inside) is less than B130516900.

Instructions (On a PC - Try similar for MAC)

  1. Make sure camera has new batteries.
  2. Turn camera to 'OFF' position and remove the SD card.
  3. Delete everything on SD card on your computer. The SD card should not be blank.
  4. Download firmware
  5. Unzip it using windows unzipping software. Unzipping software links on our download page. The folder should contain 2 files.
  6. Copy the two files to your SD card.
  7. Eject the SD and plug into your camera.
  8. Press and hold down the UP button while moving the switch from the 'OFF' position to 'SET UP'. Continue to hold the UP button for at least the first 10 seconds. The camera setup LED on the front of the camera will flash red and green. The Upgrade starts and finishes in about 30 seconds, once it has finished the green LED light will stop blinking and turn to simply a red LED motion sensor light.
  9. Your camera should be now ready to go.
Share/Save/Bookmark